Table of Contents
Advertisement
9.3
Adjusting the seat angle
CAUTION! Adjusting the seat tilt or the backrest angle changes the geometry of the
mobility device and directly influences its tipping stability!
• For details regarding tipping stability, negotiating gradients and obstacles and the correct
adjustment of seat tilt or backrest angle, please see chapters "Taking Obstacles" on page
33 and "Driving up and down gradients" on page 35.
9.3.1
Electric
Please consult the user manual for your remote for information about electrical adjustment.
9.3.2
Manually using spindle
The seat angle is adjusted by means of a spindle, which is to be found at the front underneath the
seat frame.
When adjusting the seat angle it should be ensured that at least 1cm of the threaded bolt always
remains inside the spindle and is not completely unscrewed from the spindle.
NOTE
It is easier to adjust the angle of the seat when there is nobody sitting in the wheelchair.
45
Advertisement
Table of Contents
