Table of Contents
Advertisement
9.7.1
Types of postural belts
Your wheelchair can be fitted with the following postural belt types ex-works. If your wheelchair has
been fitted with a different belt to those listed below, please ensure that you have received the
manufacturer's documentation with regard to correct fitting and use.
Belt with metal buckle, adjustable one side
Belt can only be adjusted on one side which can result in
the buckle not sitting centrally.
Belt with metal buckle, adjustable both sides
Belt can be adjusted on both sides. This means that the
buckle can be centrally positioned.
9.7.2
Adjusting the postural belt correctly
• Ensure that you are sitting correctly, which means that you are sitting right at the back of the
seat, your pelvis is positioned erect and as symmetrically as possible, not to the front, to the
side or at one edge of the seat.
• Position the postural belt so that your hipbones can be easily felt above the belt.
• Adjust the belt length using one of the adjustment aids described above. The belt should be
adjusted so that you can fit a flat hand between the belt and your body.
• The buckle should be positioned as centrally as possible. In doing so, please carry out
adjustments on both sides as much as possible.
63
Advertisement
Table of Contents
