Table of Contents
Advertisement
Serial ATA Port0 Mode and Serial ATA Port1 Mode
These fields are used to select the master/slave mode of the
Serial ATA drives. Make sure they do not conflict with the set-
tings of the IDE hard drives.
Onboard Device
Move the cursor to this field and press <Enter>. The following
screen will appear.
The settings on the screen are for reference only. Your version may not be identical
to this one.
USB Controller
Enabled Enables the onboard USB.
Disabled Disables the onboard USB.
USB 2.0 Controller
If you are using a USB 2.0 device, this field must be set to Enabled.
USB Keyboard Support
By default, this field is Disabled. However, if you are using a USB
keyboard under DOS, make sure to enable this function.
USB Mouse Support
This field is used to enable or disable the USB mouse.
3
BIOS Setup
8 1
Advertisement
Table of Contents
