Exit Without Saving; Intel Raid Bios Setting Utility - DFI-ITOX G4H875-N User Manual

Exit Without Saving

When you do not want to save the changes you have made,
highlight "Exit Without Saving" and press <Enter>.
Type "Y" and press <Enter>. The system will reboot and you will
once again see the initial diagnostics on the screen. If you wish to
make any changes to the setup, press <Ctrl> <Alt> <Esc> simulta-
neously or <Del>

Intel RAID BIOS Setting Utility

The Intel RAID BIOS Setting Utility is used to configure and manage
RAID on Serial ATA drives.
Important:
Before you run the Intel RAID BIOS Setting Utility, make sure
the Serial ATA settings in the Integrated Peripherals submenu
("OnChip IDE Device" section) of the Award BIOS is configured
properly.
After you power up the system and all hard disk drives have been
detected, the Intel RAID BIOS status message screen will appear.
Press the <Ctrl> and <I> keys simultaneously to enter the utility.
The utility allows you to build a RAID system with Windows
®
Windows 2000 installed on a RAID 0 or RAID 1 Volume using
two Serial ATA (SATA) hard drives.
after memory testing is done.
3
BIOS Setup
® XP or
103