The Easy Dialog System - Grundig CUC 1837 Service Manual

DIGI 100
10
12
GRUNDIG Service
EASY DIALOG SYSTEM

The Easy Dialog System

Your TV set is equipped with the »GRUNDIG Easy Dialog System«.
That means that operating instructions are not, as is usual, in a printed manual,
but rather appear on the screen as dialogue fields.
The »Easy Dialog« menu
The »Easy Dialog« menu is the control centre for your TV set.
Here you can make a variety of settings, call up information, and get specific
help for operating your television (e.g. info about the remote control, a list of
key words A-Z).
Just try it out. You can't do anything wrong.
– At every step of operation, the dialog box shows which buttons can be used to
carry out particular functions.
Using the Easy Dialog system
Call up and exit the Easy Dialog.
i
1 ... 0 Direct call of menu items.
Select menu items up/down.
P+, P -
Change settings.
OK Call up functions or confirm the selected function.
D Call up help text.
F F
Return to preceding menu.
ADDITIONAL FUNCTIONS
Alphanumeric channel selection
You may select the channel positions directly by entering the channel name (e.g.
ARD). For this, letters are assigned to the numeric buttons
letters can be assigned.
1 Use »2 ...
letter A). A list of all TV channels beginning with the letters »A«, »B«, or »C«
appears on the picture screen.
Every entry of a further letter confines the list of channel names.
2 Use »P+, P -
call it up.
Note:
Three methods are possible for selecting a channel position:
1. Letter entry off: The channels are only selected by entering digits.
2. Letter entry on: The channels are only selected by entering alphanumeric
characters.
3. Mix: When entering a digit, the TV set switches automatically to the
corresponding channel position and the channel list for assigning letters is
displayed.
Example: Press »3«. The TV set switches to channel position 3 (e.g. BR3),
in addition a list of the channels beginning with »D«, »E«, or »F« is
displayed.
The channel selection mode is selected in the »Installation« menu under the
»Special functions« menu item. See also the notes in the Easy-Dialog system.
_____________________________________________
_______________________________________________________
0« to enter the first letter of the channel name (e.g. »2« for the
« to select the desired channel in the list then press »OK« to
Allgemeiner Teil / General Section
»2 ... 0«. Up to four
1 - 19