The Remote Control; Programming Tv Channels - Grundig CUC 1837 Service Manual

Allgemeiner Teil / General Section
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user
instructions the part number of which is indicated in the relevant spare parts list.
1 - 18
AT A GLANCE
_____________________________________________________________________________

The remote control

PIP
E
D
1 ... 0
i
Z
P+, P-
OK
TXT
TV-G
z z
F F
Mode
Tele Pilot 100 C
SETTINGS
______________________________________________________________________________

Programming TV channels

The TV set is equipped with the automatic tuning system "ATS euro plus" which
carries out the channel position assignment for you.
1 After switching on the TV set, select the »English« dialog language with
»P +,
2
Select your country (place of installation) with
»OK«.
The automatic tuning system is started. Depending on the number of
channels which can be received, the search can take one minute and more.
3 When the automatic allocation of the channel positions is completed, the
»Easy Dialog tips« menu appears. Via this menu you may learn how to ope-
rate your TV set.
4
Select the desired menu item with
5
To switch the set to TV mode, select »TV» with
»OK«.
Switches the TV set off (standby).
TV picture in teletext mode.
Picture format switching.
Displays the index A-Z.
Channel selection and switching on from standby,
alphanumeric channel selection (see page 12),
entry of teletext page numbers.
Sound on/off (mute)
Calls up the »Easy Dialog« menu.
Zap function (see page 11).
Switching on from standby (only »P+«),
step-by-step channel selection, cursor up/down.
Volume, cursor to the left/right.
Changes and activates various functions.
Teletext mode/TV mode.
TV-Guide, info about current programme.
Calls up the »PICTURE« menu.
Clock time and channel position information on/off.
Still picture.
Calls up the »SOUND« menu.
Switches to the control of the basic functions of a Grundig satellite
receiver (SAT), video recorder (VCR) or DVD player (DVD).
Repeatedly press »Mode« until the respective LED »SAT«,
»VCR«, or »DVD« is lit. Then press the desired function button.
The selected mode remains active until the LED goes out. It is also
possible to switch the remote control back to TV mode by pressing
the »Mode« button.
Which functions can actually be controlled depends of course of
the equipment of the connected unit. Just try it out.
P -« then confirm with »OK«.
»P -« then press »OK« to call it up.
7
»P +, P -« then confirm with
»P +, P -« then confirm with
9
GRUNDIG Service
DIGI 100