Table of Contents
Advertisement
6.8 Seat Depth Adjustment (Fig. 60 - 62)
1.
Remove the 5mm depth adjustment bolts from both sides of the
seat.
Fig. 60
2.
Slide the rear backrest and armrests into the desired seat depth
position. Reference seat depth position patterns (A)
Fig. 61
3.
Replace both sets of depth adjustment bolts. (Use 20 N/m or 177
in/lb of torque.)
Fig. 62
6.9 Backrest Angle Adjustment (Fig. 63 - 65)
1.
Remove the 5mm backrest bracket index bolts (A) on both sides
of the backrest. Loosen the 5mm backrest bracket pivot bolts (B) on
both sides of the backrest.
NOTE– The index bolt (A) may be in a different starting position than
shown below.
060474
Fig. 63
2.
Tilt the backrest assembly forward or backward to the desired
angle. See angle configurations below.
Fig. 64
3.
Reinsert and tighten both backrest bracket index bolts and bracket
bolts (A & B). (Use 20 N/m or 177 in/lb of torque.)
NOTE– The figures below represent the 8°angle.
Fig. 65
6.10 Back Height Adjustment (Fig. 66 - 76)
1.
Begin by removing the upholstery cover.
Fig. 66
21
Quickie SALSA
Advertisement
Table of Contents
