Table of Contents
Advertisement
2.
Loosen the upholstery straps. It is not necessary to remove the
upholstery.
Fig. 67
3.
Remove the top upholstery screws. The upholstery can now be
moved and vertically compressed to provide access to the hidden
Phillips-head bolts.
Fig. 68
4.
Remove the 4mm towel bar bolts and the towel bar.
NOTE– This step is not necessary in every case. If the push handles
are high enough, the towel bar bolts might not thread into the push
handle tubes. To test, skip this step and move to Numbers 5 and 6.
If the towel bar does not impede movement of the push handles, the
towel bar may be left intact.
Fig. 69
5.
Remove the 4mm backpost adjustment bolts.
Fig. 70
22
Quickie SALSA
6.
Move both backposts to the desired height.
Fig. 71
7.
Replace the backpost adjustment screws. (Use 10 N/m or 88.5 in/
lb of torque.)
Fig. 72
8.
If removed in Number 4, replace the towel bar and the towel bar
bolts. (Use 10 N/m or 88.5 in/lb of torque.)
NOTE– The towel bar may be repositioned at this point as well.
Fig. 73
9.
Replace both top upholstery bolts. Ensure the bolts thread through
the top upholstery eyelets (A).
Fig. 74
060474
Advertisement
Table of Contents
