Vertex Standard VX-1210 Service Manual page 6

Operating Manual Reprint
O
PERATION
O Q S
PERATION UICK TART
1. Turn the transceiver on
by rotating the POWER
switch clockwise.
2. Rotate the SEL knob to
s e l e c t t h e d e s i r e d
Memory Channel.
3. Rotate the VOL knob to
set a comfortable volume
level.
4. To transmit, press and
hold in the microphone's
PTT switch, and speak
into the microphone in a
normal voice level. To
return to the receive
mode, release the PTT
switch.
5. If the frequency of the
station you are receiving
should start to drift, ro-
tate the CLAR knob to
follow the drifting signal;
this does not cause your
radio's transmitting fre-
quency to move.
6
A
DVANCED
TOGGLE Switch Functions
The VX-1210's TOGGLE switch functions can be customized,
via programming by the dealer. Some features may require the
purchase and installation of optional internal accessories. The
possible TOGGLE switch programming features are illustrated
at the bottom, and their functions are explained on the next page.
For further details, contact your Vertex Standard dealer.
For future reference, check the box next to each function that has
been assigned to the toggle switch on your particular radio, and
keep it handy.
Functions
SELCALL Function
High/Low Power Select
Noise Blanker on/off
Antenna Tuner on/off
Antenna Tuning
Encryption on/off
LAMP on/off
Display Select (Tag/Frequency)
HAIL on/off
VFO/Memory Select
TELCALL Function
Squelch on/off
Speaker Select
None
O
PERATION
A Switch B Switch C Switch
N/A
N/A N/A
N/A N/A
N/A N/A
N/A
N/A N/A
N/A N/A
N/A
N/A
N/A
N/A N/A
N/A N/A