main menu
Alarm setting
1. In the <Network> setting window, press the top down
(▲▼) button to move to the <Connection Mode> mode
and press the [ENTER] button.
2. Select the <Alarm> menu.
3. Press the top/down/left/right(▲▼◄►) button to toggle
settings and set up your preferences.
• Disconnect Alarm Output Port : Select a method for
outputting an alarm when network connection is terminated.
- If you select <1> or <2>, the signal is outputted from the
alarm output terminal in the rear.
- If you select <BEEP>, the alarm sound will be played.
- If you select <ALL>, the alarms sounds and the warning sounds from the rear will be heard at the same
time.
• Duration : Select the duration of alarm signal outputs and warning sounds.
- It is outputted to the alarm output terminal (1,2) selected in the connection cancellation alarm output port.
- If you select <BEEP>, the alarm sound will be played.
- If you select <ALL>, the alarms sounds and the warning sounds from the rear will be set at the same
time.
4. After finishing setting the alarms, select <OK>.
62_ main menu
Connection Mode
Alarm
Interface
Port
Disconnect Alarm Output Port
1
BEEP
Duration
OFF
OK
Cancel
2
All