Table of Contents
Advertisement
Recording Color Tags
Color
White
Orange
Blue
Green
Each press of a selected cell will cycle through <No Recording>-<Continuous>-<Event>-
<Both(Cont&Evnt)>.
Event Record Duration
You can set the beginning and ending point of a recording on an event.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <Event Record Duration>, and press [ENTER]
button.
2. Use direction buttons ( ◄ ►) to move to a desired item,
and set the value.
• Pre Event : The recording of an event will start at a
pre-determined time prior to the actual occurrence of the event.
If it is set to 5 seconds, the recording begins from
5 seconds before the event.
• POST Event : The recording will continue for a
pre-determined time after the actual end of an event.
If it is set to 5 seconds, the recording ends in 5 seconds after an event.
3. When the event recording duration setup is done, press <OK>.
REC Quality / Resolution
You can set resolution, FPS, and quality of recordings by channel, and by recording type of standard / event.
For more information about the resolution, refer to the "Product Specification" section. (Page 114)
Setting Standard Recording Properties
You can set each channel's resolution, quality and FPS for normal recordings.
Using the mouse may help make setup easier.
1. Use the up/down buttons ( ) in <Record> window to
move to <REC Quality & Resolution>, and press
[ENTER] button.
2. Select <Standard>.
3. When the recording setup is done, press <OK>.
Part Names
No Recording
Continuous
Event
Both(Cont&Evnt)
Functions
No schedule / event recording
Scheduled recording only
Event recording only
Both scheduled / event recordings
Event Record Duration
Pre Event
CH
1
OFF
2
OFF
3
OFF
4
OFF
OK
Cancel
REC Quality & Resolution
Standard
Event
Resolution
Record Rate
CH
1
CIF
7fps
2
CIF
7fps
3
CIF
7fps
4
CIF
7fps
OK
Cancel
POST Event
1 min
1 min
1 min
1 min
Record Quality
Level4
Level4
Level4
Level4
English _53
Hide quick links:
Advertisement
Table of Contents
