Setting the Spot Out
You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
3.
Use the up/down buttons () in <Device> window to
move to <Monitor>, and press [ENTER] button.
Select <Spot Out>.
4.
The number of Spot Out terminals differs according to the
model.
Use direction buttons (◄ ►) to move to a desired
5.
item, and set the value.
•
Spot Out 1 : You can select between Auto Sequence, and
Single.
•
Set Mode : A window for "Set Spot Out" appears and you
can set the channel for it.
You can set the dwell time between the screen switching in
"Setting the Device > Camera > SEQ-Dwell Time".
(Page 42)
M
You can setup using the mouse right button in Live screen.
Refer to "Spot Out". (Page 29)
6.
When the Spot Out is done, press <OK>.
Setting the Screen Mode
You can confi gure the Live screen and Split Screens.
Using the mouse may help make setup easier.
3.
Use the up/down buttons () in <Device> window to
move to <Monitor>, and press [ENTER] button.
4.
Select <Mode>.
Use direction buttons (◄ ►) to move to a desired
5.
item, and set the value.
•
Live Screen : Select split modes for the Live screen.
4-split screens are included by default.
•
Play Screen : Select split modes for the playback screen.
Single screen and 4-split screen are provided by default.
6.
When the screen mode setup is done, press <OK>.
Z6806127401A_SRD-470, 470D-IB_EN49 49
Z6806127401A_SRD-470, 470D-IB_EN49 49
Monitor
Spot Out
Monitor
Mode
Spot Out 1
SEQ
Set Mode
All
OK
Cancel
Monitor
Spot Out
Monitor
Mode
Set Mode
Spot Out 1
4-split
Set Spot Out
1
2
3
4
OK
OK
Cancel
Monitor
Mode
Monitor
Spot Out
Live Screen
Play Screen
Live
OK
Cancel
English _49
Play
2010-04-30 오후 6:08:44
2010-04-30 오후 6:08:44