Setting The Spot Out; Setting The Screen Mode - Samsung SRD-470 User Manual

Setting the Spot Out

You can set the DVR to output information / video apart from the monitor out.
Using the mouse may help make setup easier.
3. Use the up/down buttons (▲▼) in <device> window to
move to <monitor>, and press [enTer] button.
Select <Spot out>.
4.
`
The number of Spot Out terminals differs according to the
model.
5. Use direction buttons (▲▼_ +) to move to a desired
item, and set the value.
Spot Out 1 : You can select between Auto Sequence, and
~
Single.
Set Mode : A window for "Set Spot out" appears and you
~
can set the channel for it.
You can set the dwell time between the screen switching in
"Setting the device > Camera > SeQ-dwell Time".
(Page 42)
M
`
You can setup using the mouse right button in Live screen.
Refer to "Spot Out". (Page 29)
6. When the Spot Out is done, press <oK>.

Setting the Screen mode

You can configure the Live screen and Split Screens.
Using the mouse may help make setup easier.
3. Use the up/down buttons (▲▼) in <device> window to
move to <monitor>, and press [enTer] button.
4. Select <mode>.
5. Use direction buttons (▲▼_ +) to move to a desired
item, and set the value.
Live Screen : Select split modes for the Live screen.
~
4-split screens are included by default.
Play Screen : Select split modes for the playback screen.
~
Single screen and 4-split screen are provided by default.
6. When the screen mode setup is done, press <oK>.
Monitor
Spot Out
Monitor Mode
Set Mode
 Spot Out 1 SEQ
OK Cancel
Monitor
Spot Out
Monitor Mode
 Spot Out 1 4-split Set Mode
Set Spot Out
1 2 3
OK
OK Cancel
Monitor
Mode
Monitor Spot Out
Live Screen
Play Screen
Live
OK Cancel
English _49
All
4
Play