OPERATING ELEMENTS
Speedometer activation and test
Tripmaster switch
(Option: Tripmaster switch)
You can use the trip master switch to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.
Setting kilometers or miles
Info
If you change the unit, the ODO value is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are deleted at the changeover.
Activating the speedometer:
The speedometer is activated when one of the keys is pressed or an impulse comes
from the wheel speed sensor.
Display test
For the function test of the display, all display segments light up briefly.
400313-01
WS (wheel size)
After the function test of the display, the wheel size WS is displayed.
Info
2205 mm corresponds to the size of the 21" front wheel with a series produc-
tion tire.
The display then changes to the last selected mode.
400314-01
Condition
The motorcycle is standing.
Press the button
display.
Press the button
The Setup menu opens and the active functions are displayed.
Press the button
Setting Km/h
Press the button "+".
Setting Mph
Press the button " ".
400329-01
Press the button
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h / Mphdisplay flashes.
for 3 - 5 seconds.
14