Tripmaster Switch - KTM 300SX Owner's Handbook Manual

+
–

Tripmaster switch

The switch has three buttons: MODE, + (plus) and – (minus).
MODE
D
O NOT TRY TO CHANGE THE MODE OR READ THE SETTINGS WHILE DRIVING
ATTENTION WILL BE DISTRACTED FROM THE TRAFFIC WHICH CAN EASILY LEAD TO AN
.
ACCIDENT
Electronic speedometer functions provided by the Tripmaster
switch
The display modes on the electronic speedometer will change in the follo-
wing order. If not, please read the chapter "ACTIVATING AND DEACTIVA-
TING THE DISPLAY MODE."
SPEED/ODO display mode
SPEED displays the speed in KPH or MPH. The displayed figure cannot be
cleared.
ODO displays the kilometers or miles traveled. The displayed figure cannot
be cleared.
+
BUTTON
–
BUTTON
press the MODE
press and hold the MODE
SPEED/MAX display mode
MAX displays the maximum speed. It is always active.
+
BUTTON
–
BUTTON
press the MODE
press and hold the MODE
SPEED/LAP display mode
LAP displays the stopped lap time in hours, minutes and seconds.
+
BUTTON
–
BUTTON
press the MODE
press and hold the MODE
LAP/LAP display mode
The lap number is shown at the top and the lap time in hours, minutes and
seconds at the bottom of the display.
If no lap time is stored or the motorcycle is driving, the LAP/LAP mode will
be skipped.
Hold the MODE button for 3 seconds in the SPEED/LAP mode to clear the
stored lap times.
+
BUTTON
–
BUTTON
press the MODE
press and hold the MODE
WARNING
no function
no function
to change to the next mode
BUTTON
3
BUTTON SECONDS
no function
no function
to change to the next mode
BUTTON
3
BUTTON SECONDS
Starts and stops the stop watch. The lap time is not reset to 0.
Stops the running stop watch, stores the lap time and restarts
the stop watch. The time is reset to 0. A total of 10 lap times
can be stored and read in the SPEED/LAP display mode. To
clear all of the stored lap times, hold the MODE button for 3
seconds in the SPEED/LAP mode.
to change to the next mode
BUTTON
If no lap time is stored or the motorcycle is driving, the LAP/LAP
mode will be skipped.
3
BUTTON SECONDS
stored lap times to 0
changes to the next lap time.
no function
to change to the next mode
BUTTON
3
BUTTON SECONDS
. Y
OUR
to change to the next mode
to reset the MAX figure to 0
to reset the LAP figure and all
to change to the next mode
7