Speedometer; Overview; Activation And Test; Tripmaster Switch - KTM 500 EXC Owner's Manual

6 CONTROLS
6.11

Speedometer

6.11.1

Overview

6.11.2

Activation and test

6.11.3

Tripmaster switch

(Option: Tripmaster switch)
The tripmaster switch is used to control the functions of the speedometer from the handlebar.
Info
The trip master is an optional accessory.
6.11.4

Setting kilometers or miles

Info
If you change the unit of measure, the ODO value is retained and converted accordingly.
The values TR1, TR2, A1, A2 and S1 are cleared when the unit of measure is changed.
–
Press the button
menus.
–
Press the button
–
Press the button
Info
When the vehicle is delivered, only the SPEED/H and SPEED/ODO display modes
are activated.
400312-01
Activating the speedometer
The speedometer is activated when one of the buttons is pressed or an impulse comes
from the wheel speed sensor.
Display test
To enable you to check that the display is functioning properly, all display segments
light up briefly.
400313-01
WS (wheel size)
After the display function check, the wheel size WS is displayed briefly.
Info
The number 2205 equals the circumference of the 21" front wheel with stan-
dard tires.
The display then changes to the last selected mode.
400314-01
Condition
The motorcycle is stationary.
–
Press the button
display.
–
Press the button
The Setup menu is displayed and the active functions are shown.
–
Press the button
Adjusting Km/h
–
Press the button
400329-01
to change the display mode or change to one of the Setup
to control different functions.
to control different functions.
briefly and repeatedly until H appears at the bottom right of the
for 3 - 5 seconds.
repeatedly until the Km/h/Mph display flashes.
.
18