Snmp Management; Mib Objects; Snmp Traps - KTI Networks KSD-800M Series Installation Manual

6. SNMP Management

The switch supports SNMP v1 protocol for SNMP management. One device MIB file is provided in
the product CD. The MIB file is used for SNMP management software to set or get the management
information objects provided in the switch.

6.1 MIB Objects

The device private management objects provided by the SNMP agent in the switch are:
Objects OID
Enterprise 867
Device 37
Software 867.37.1.1
867.37.1.2
Port Status 867.37.4.1
Port Control 867.37.4.2
VLAN 867.37.5
QoS 867.37.6

6.2 SNMP Traps

In addition to the MIB, the switch also provides SNMP trap function for sending associated trap
messages to trap managers when the predefined events are detected. The following trap events are
supported:
Trap Event
Cold Start
Login failure
Port link change
The Login failure trap and port link change trap can be disabled individually. The trap manager
settings must also be properly configured to make the trap function works. Refer to Trap Manager
menu in telnet management interface and Administrator->Basic menu in web management interface.
Description
Manufacturer ID
Device ID (Snmp agent)
Device firmware version
MIB version supported
Port status information including:
Link, Auto-negotiation, speed, duplex
Port control information including:
Port function, auto-negotiation, speed, duplex
VLAN function related status and control objects
QoS function related status and control objects
Description
The switch is powered on and complete initialization
Telnet and web authentication failure
Any port link change among the switched ports
- Port link down to link up
- Port link up to link down
-63-