Port Controls - KTI Networks KSD-800M Series Installation Manual

Trap Manager Settings
IP Address
Community
<<Add>>
Remove
Enable Link Change Trap
Enable Login Failure Trap

5.4.2 Port Controls

Port Settings
Port
Port Function
Auto Negotiation
Description
Specify the IP address of the trap manager to which the switch will
send Snmp traps when predefined events occur.
Community string used together with the trap messages sent to the
trap manager
Button to add a new trap manager (specified by an IP and Commu-
nity) into manager list
Button to remove the trap manager
Button to enable the switch to send a trap when any port link
changes
Button to enable the switch to send a trap when any login failure is
detected
Description
Specify the ports for the new settings.
More than one port can be configured at the same time. Use <Shift> key
and <Ctrl> key to specify multiple ports.
Enable port transmission function, options:
N - unchanged
Enable - enable the port function
Disable - disable the port function
Enable auto negotiation function, options:
Null - unchanged
Enable - enable the port auto-negotiation function
Disable - disable the port auto-negotiation function and use forced mode
-52-