Table of Contents
Advertisement
4. Software Management
The switch provides the following in-band management interfaces for configuring the switch to meet
requirements for different applications:
•
Telnet over TCP/IP
•
Http web-based over TCP/IP
•
SNMP over TCP/IP
4.1 Telnet Management Interface
Use Telnet software to perform the management operation. The most convenient solution is using the
built-in Telnet function in your Windows PC. Execute Telnet command as follows:
>telnet xxx.xxx.xxx.xxx
The specified xxx.xxx.xxx.xxx is the IP address of the switch. Factory default IP address is 192.168.0.2.
A welcome message and login prompt are displayed if the connection is established properly.
Welcome to Telnet Server
login:xxxxx
password: xxx
Welcome xxxxx
Factory default login name : admin
Factory default password : 123
It is suggested to change the user name and password first before performing other configuration. To
change the user name and password, select [6] Security Manager for configuration.
Main Menu
INET>
Setup Menu
TCP/IP stack v1.0
[0] Print this menu
[1] IP Menu
[2] SNMP Menu
[3] Port Config
[4] Administrator
[5] Restore Default Values
[6] Security Manager
[7] Update firmware
[8] Reboot System
[Q] Exit
Please Select(0-9)....
Note: If [Unchange] option is provided during configuration, it means keeping current
setting.
-33-
Advertisement
Table of Contents
