Snmp Traps - KTI Networks KS-2260 Operation Manual

4.3 SNMP Traps

The switch supports the following SNMP traps. When the trap event
occurs, the SNMP agent will generate a trap notification to SNMP trap
manager stations. Up to three trap managers can be supported. Each trap
manager must be configured with : IP address and Community string
which the trap manager belongs.
The provided traps and associated events are:
Trap Name
Cold Start
Authentication Generic
Port link change Generic
Port link change Generic
Fan 1 failure
Fan 2 failure
RFC1157 Event of Trap Generated
Generic The device is powered on or reboot
remotely and complete initialization
SNMP community authentication failure
Any switched port link down
Any switched port link recovery
Specific Fan 1 failure warning or recovery
Specific Fan 2 failure warning or recovery
-98-