State Activity - KTI Networks KS-2260 Operation Manual

3.4.5.2 State Activity

-------------------------------------------------------------------------
Managed 24+2G Switch : LACP Port Active State Configuration
Port
----------------------------
1
2
3
4
5
6
7
8
9
10
11
12
13
-------------------------------------------------------------------------
Use <Edit>.command to set LACP state activity mode for each port.
State Activity setting options -
Active : The port automatically sends LACP protocol packets. If it be-
longs to a trunk group which is set to LACP mode.
Passive : The port does not automatically send LACP protocol packets
and responds only if it receives LACP protocol packets from the oppo-
site device.
Note:
If a trunk group is set to LACP mode, all its member ports are set to
[Active] default.
State Activity
Active
Active
Active
Active
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
action-> <Edit>
Port
-----------------------------
14
15
16
17
18
19
20
21
22
23
24
25
26
<Save> <Quit>
-80-
State Activity
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive
Passive