KTI Networks KS-2260 Operation Manual page 110

10/100 managed fast ethernet switch with 100fx and gigabit connectivity
Table of Contents

Advertisement

Enable Low Queue Delay Bound : setting to limit the low priority packets
queuing time in switch. If enabled and queuing time expired, the low
priority packets queued in switch will be sent.
Note: Make sure Max bridge transit delay bound control is enabled when
Low Queue Delay Bound control is set to ENABLE.
Max. Delay Time : max. low queuing time, value range 1 ~ 255 (2ms/unit)
Broadcast Storm Filter Mode : To configure broadcast storm control,
enable it and set the upper threshold applied to all ports. The threshold is
the percentage of the port total bandwidth used by broadcast traffic.
When broadcast traffic for a port rises above the threshold set, broad-
cast storm protection becomes active. The valid threshold values are 5%,
10%, 15%, 20%, 25% and Off.
-110-

Advertisement

Table of Contents
loading

Table of Contents