Theater Mode - Krell Industries EVOLUTION TWO MONAURAL PREAMPLIFIER Owner's Reference Manual

Theater Mode

This function enables you to select theater mode volume for a particular input.
Use this function when connecting the output of a preamp/processor to the
Evolution Two for home theater applications. Configuring an input for theater
mode sets that input for unity gain and suspends the level control of the Evolution
Two. Volume adjustments are then made through the preamp/processor connect-
ed to the input configured for theater mode on the Evolution Two. The options are:
ON, OFF.
Enter the menu, then:
1.
Use the level control knob on the preamplifier chassis front panel or the up and
down keys (16) on the remote control to select
2.
Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control
.
B-1
3.
Use the level control knob or the up and down keys to select the desired input:
B-1, B-2, B-3, S-1, S-2, S-3, S-4, C-1, C-2, C-3,
4.
Press the enter button or key. The front panel display shows the default mode:
.
OFF
5.
Use the level control knob or the up or down keys to select
6.
Press
ENTER
ON
The selected input is set to
disengaged on the Evolution Two.
OFF
The selected input is configured normally and the volume control for the normal
input is engaged on the Evolution Two.
Note
Only one input on the Evolution Two can be in theater mode at a time. When theater mode
is set for an input, theater mode is cleared automatically from other inputs.
The Evolution Two selects the theater input automatically upon power on, if the input trig-
ger is configured for
The front panel display (15) shows the default input:
.
to confirm the selection and return to the selected input.
and the volume control for the theater input is
THEATER
. See Input Trigger, on pages 39-40.
THEATER
47
THEATER.
or
TAPE.
ON
or
OFF.
continued