Front Panel Description: Theater Amplifier Standard - Krell Industries Theater Amplifier Standard Instructions For Use Manual

Front Panel Description: Theater Amplifier Standard

See Figure 1 on page 6
The Theater Amplifier Standard front panel provides power on and indicates operating
status.
1 Power Button
Use this button to switch the Theater Amplifier Standard power between the stand-by
and the operational modes and also to switch the 12 VDC output (12 V trigger) on and
off.
2 Stand-by LED
The red stand-by LED illuminates when the AC power cord is plugged into the wall and
the back panel power switch is in the up (on) position.
3 Power Indicator
The blue power indicator illuminates when the amplifier is in the operational mode.
Krell Theater Amplifier Standard 7