Table of Contents
Advertisement
(SECTION SEVEN: Customizing the Evolution Two continued)
Recall
RS-232 Control
17 Menu Button or Key
Enter or exit the menu.
16 Volume Knob
or Level Keys
Navigate the menu hierarchy,
review functions and configu-
ration options.
18 Enter Button or Key
Select a configuration option
or confirm a selection.
BACK
Scroll up the menu hierarchy,
or exit a menu option without
confirming it.
This function enables you to access factory default settings or your own saved
settings, or to undo a clone. The options are:
Enter the menu, then:
1.
Use the level control knob on the preamplifier channel front panel or up and
down keys (16) on the remote control to select:
2.
Press the enter button on the preamplifier channel front panel or the or enter
key (18) on the remote control. The front panel display (15) shows the default
mode:
.
FACTORY
3.
Use the level control knob or the up and down keys to select the desired
option:
FACTORY, SAVED,
4.
Press the enter button or key to confirm the selection. The front panel display
reads:
RECALL.
FACTORY
Recalls the factory settings.
SAVED
Recalls settings previously stored in memory using the
Save, on page 45.
CLONE UNDO
Cancels clone settings. All settings revert to the last settings in memory prior to
cloning. See also Clone, on page 35.
This function enables you to change the link transmit status of the Evolution Two.
The options are
LINK TRANSMIT, LINK RECEIVE.
Enter the menu, then:
1.
Use the level control knob on the preamplifier channel front panel or up and
down keys (16) on the remote control to select:
2.
Press the enter button on the preamplifier channel front panel or the enter key
(18) on the remote control
mode:
.
LINK TRANSMIT
3.
Use the level control knob or the up and down keys to select the desired
option:
LINK TRANSMIT,
FACTORY, SAVED, CLONE UNDO.
or
CLONE UNDO.
The front panel display (15) shows the default
.
or
LINK RECEIVE.
44
RECALL.
function. See also
SAVE
RS-232 CONTROL.
Advertisement
Chapters
Table of Contents
