Table of Contents
Advertisement
(SECTION SEVEN: Customizing the Evolution Two continued)
IR Out Control
17 Menu Button or Key
Enter or exit the menu.
16 Volume Knob
or Level Keys
Navigate the menu hierarchy,
review functions and configu-
ration options.
18 Enter Button or Key
Select a configuration option
or confirm a selection.
BACK
Scroll up the menu hierarchy,
or exit a menu option without
confirming it.
(Input Trigger continued)
OFF
The Evolution Two does not respond to 12 V input trigger commands.
NORMAL
The Evolution Two responds to 12 V input trigger commands.
THEATER
The Evolution Two responds to 12 V input trigger commands, and the theater
mode enabled input is selected automatically. See Theater Mode, on page 47.
This function enables you to access Evolution Two IR commands and program a
learning remote control.
Enter the menu, then:
1.
Use the level control knob on the preamplifier chassis front panel or up and
down keys (16) on the remote control to select:
2.
Press the enter button on the preamplifier chassis front panel or the enter key
(18) on the remote control
mode:
.
B-1 MAIN
3.
Use the level control knob or the up and down keys to select the desired IR
command from the list.
4.
Press the enter button or key to send the command out via the preamplifier
front panel IR transmitter (7). The stand-by LED (4) on the preamplifier chassis
flashes, indicating that the command has been sent.
5.
Repeat Steps 2-4 for each of the commands you wish to transmit.
6.
Press the enter button or key to confirm the selection. The front panel display
reads:
IR OUT.
For a listing of IR codes, see the Evolution Two developer's reference entitled
RS-232 Port: Sending Commands and Interpreting Data. The right-terminated
preamplifier is the link transmitter of IR data. For more information on linked pre-
amplifier channels, see Appendix: CAN Link and Multiple Evolution Two
Preamplifiers, on page 51.
IR OUT.
The front panel display (15) shows the default
.
40
Advertisement
Chapters
Table of Contents
