Engine Hanger Side Cover - DAELIM a.four Service Manual

Hide thumbs Also See for a.four:
Table of Contents

Advertisement

WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
WASHER BOLT
FLANGE BOLT
REAR WHEEL MUD GUARD
UNDER COVER
SETTING SCREW
REAR FENDER
● Luggage box. ( 3-3)
● Plug maintenance cover. ( 3-3)
● Center cover. ( 3-3)
● Rear carrier. ( 3-3)
● Body cover. ( 3-3)
● Taillight base. ( 3-4)
● Remove the 2 washer bolts securing the fuel tank
support stay.
● Draw the rear part of the rear fender from the bracket in
the frame.
● Loosen the rear cushion under bolt, remove the rear fender.
•If removal is difficult, recheck each connection and
try removing again.
● Install in the reverse order of removal.
REAR WHEEL MED GUARD
● Loosen the 2 flange bolts securing the EX muffler.
● Loosen the flange bolt securing the air cleaner.
● Loosen the flange bolt securing the inlet pipe.
● Remove the rear wheel mud guard.
● Install in the reverse order of removal.
•Never perform the maintenance of the muffler right
after stopping the vehicle because the muffler is
extremely hot.
UNDER COVER
● Remove the floor side cover. ( 3-4)
● Remove the engine hanger side cover. ( 3-5)
● Loosen the 2 R/L setting screws securing the frame.
● Remove the under cover.
● Install in the reverse order of removal.
EXTERNAL PARTS
3-7

Advertisement

Table of Contents
loading

Table of Contents