To Save And Change Data; Saving Data - IPSO -LSG MICRO 9 User Manual

Saving and changing programmed data
Saving programmed data
press
F1
❺
No "DAT-files" exist in the directory yet
press
Esc
type
K
press
❺
"DAT-files" are already existing in the directory
press
press
press
Y
a new display appears with in the middle the "PATH" of the directory
(f.ex. C:\MICRO-20)
"no files found!" appears in the upper left corner
a white text block appears in the left bottom corner
the name under which the data are saved.
This name can consist of maximum 8 characters : numbers and/or letters.
to confirm
The data are saved in a file under the name which appears on the right upper
corner of the display.
Extension.DAT is automatically added to the name
f.ex. xxxxxxxx.DAT
A list with the existing files is given in the left upper corner.
❺
If a new "DAT-file" with new data should be made, repeat the above
mentioned actions.
❺ If an existing name has to be overwritten with new data.
to select the name
to confirm
A confirmation to overwrite is asked on the display.
to confirm
The selected file will be overwritten by the data just programmed.
34