IPSO -LSG MICRO 9 User Manual page 29

press
press
type
press
type
C. FINAL SPIN:
The extraction of the linen
Two variables should be entered, namely the type of action of the drum and
the duration of the action. The water is drained during each action.
to select:
: no wash action during the selected period.
NO ACTION
: reduced wash action (4/11) during the selected period.
GENTLE
: normal wash action (9/6) during the selected period.
WASH
: low spin at 500 rpm during the selected period.
LOW
: high spin at 1000 rpm during the selected period.
HIGH
: short spin during the selected period.
GENTLE SPIN
Every minute of '
spinning and 50 sec. tumbling.
the duration of the drum action (max.9 min.)
Remark:
Remark:
A security built in the software arranges that low spin automatically is
carried out for 2 minutes when high spin is programmed. This security
prevents the motor from overheating.
The HF55 also allows you to enter a desired rpm for the extraction. However,
the following needs to be kept in mind:
Gentle spin : choice only between 200 or 350 rpm.
Low spin : choice between 200 or 350 rpm. From 350 to 500
rpm in steps of 5 rpm.
High spin : from 500 to 1.000 rpm in steps of 5 rpm.
a white text block appears
the desired rpm
' consists of 10 sec.
GENTLE SPIN
4
31