Table of Contents
Advertisement
Programming the configuration menu of the machine
In the configuration menu, you can initialize the machine according to its own technical characteristics (e.g.
machine with valve or pump, heating, value of the coin meter, etc...). Also the options such as level control,
visualising the temperature etc... need to be entered here.
Access to the
configuration
menu
F4
press
Configuration
press
The cursor is now pointing to "INLET TYPE" of the config. menu.
INLET TYPE:
The waterinletsystem of the machine needs to be chosen here.
Select one of the following waterinletsystems:
SOFT
WARM
7 - 4 - 3
2 - 5
A
B
C
D
When the machine is equipped with soap pumps for automatic soapinjec-
tion, the corresponding inlets need to be selected.
SOFT WARM
HARD
7 - 4
2 - 5
4 - 6
A
B
C
D
4
SOFT
HARD
7 - 4 - 2
3 - 6
A
B
C
D
17
Advertisement
Table of Contents
