Danfoss FP975 Installation & User's Instructions page 27

Programming the heating in
7 day mode
1. Press PROG until SET CH ON
TIME appears at the top of
the display and MO appears
at the bottom of the display.
Use the + and - buttons to
set the time you want your
heating to fi rst come on in
the morning (Event 1).
2. Press NEXT ON/OFF to
move to Event 2.
Continue programming the
heating ON and OFF times
in this way by using the +
and - buttons to set the
time you want and pressing
the NEXT ON/OFF button
to move to the next setting.
3. Press DAY button once only.
TU will appear at the bottom
of the display.
27