Danfoss FP975 Installation & User's Instructions page 25

Programming the heating in
5/2 day mode
1. Press PROG until SET CH ON
TIME appears at the top of the
display and MOTUWETHFR
appears at the bottom of the
display.
Use the + and - buttons to set
the time you would like your
heating to fi rst come on in the
morning (Event 1).
2. Press NEXT ON/OFF once
only.
Use the + and - buttons to
set the time you want your
heating to go off (Event 2).
To move to the next setting,
i.e. when you would like your
heating to come on again
(Event 3) press the NEXT ON/
OFF button again.
3. Continue programming the
central heating system ON
and OFF times for weekday
Events 4, 5 & 6 as in Step 2.
25