Danfoss FP975 Installation & User's Instructions page 24

Before you change the preset programmes
Your installer will have set your unit to operate in one of the
following modes:
5/2 day - one set of programmes for weekdays and another
for weekends (page 25-26).
7 day - different settings for each day of the week
(page 27-28).
Please Note
The unit must be programmed in sequence and ON/OFF
times cannot be set out of sequence.
If you want to leave a preset time as it is, simply press NEXT
ON/OFF to move on to the next setting.
Your timeswitch allows you to programme 3 ON and 3 OFF
times each day. If you do not wish to use one of the ON/OFF
settings, simply programme the ON time to be the same as
the OFF time and the setting will not operate.
If at any time you get confused and need to reset your
!
timings to the standard programme, press the RESET
button to return to the preset programmes (see page
22).
24