Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Danfoss R06
Summary of Contents for Danfoss R06
- Page 1 User Manual Remote Control R06 Receiver www.danfoss.com...
- Page 2 User Manual R06 Receiver Revision history Table of revisions Date Changed March 2019 Updated safety information and technical description 0201 January 2019 Rebranded to Danfoss Power Solutions 0101 © Danfoss | March 2019 BC292460489593en-000201...
-
Page 3: Table Of Contents
User Manual R06 Receiver Contents Safety instructions FCC rules......................................4 General safety....................................4 Safety warnings....................................5 Technical description Dimensions......................................6 Hardware description..................................7 R06 Detailed description................................7 Installation Receiver installation..................................9 Troubleshooting R06 troubleshooting..................................10 © Danfoss | March 2019 BC292460489593en-000201 | 3... -
Page 4: Safety Instructions
• Service the equipment periodically. • When carrying out repairs, use spare parts supplied by Danfoss only. Warning Potential damage to the operator or the product. Do not use this product on machines in potentially explosive atmospheres unless the model is ATEX/RATEX certified to work in such conditions. -
Page 5: Safety Warnings
Avoid knocking or dropping the product. • Do not use the product if a failure is detected. Changes or modifications not approved by Danfoss can void the user's authority to operate this product. Quick reference precautions © Danfoss | March 2019... -
Page 6: Technical Description
User Manual R06 Receiver Technical description R06 dimensions Dimensions in mm 151.00 61.60 135.14 R 2.60 R 2.60 R 2.60 55.60 R 2.60 41.49 75.49 See next page for callout details. © Danfoss | March 2019 BC292460489593en-000201... -
Page 7: Hardware Description
User Manual R06 Receiver Technical description R06 hardware description Fixing slots Wiring CG Wiring CG AC input IN4D/IN0-10; IN0-4/20mA Signaling LEDs EP70 CAN connection BUS termination CAN TR800CE MCX Power supply 48-230 V STOP relays Maneuver relays Internal multi-band antenna... - Page 8 -25ºC to 55ºC (-13ºF to 131ºF) Relative Humidity max. 95% without condensation Weight 640 grams Dimensions (LxWxH mm) 151x129x61 Tether connection Associated transmitters (400-900MHz) Ikargo1, T70/1, T70/2, IK2 Options Inputs 4 Digital or 1 Proportional input board © Danfoss | March 2019 BC292460489593en-000201...
-
Page 9: Installation
User Manual R06 Receiver Installation R06 receiver installation The below information describes hazards to be aware of during installation and steps to locate the receiver. Risk of shock Completely shut down the machine when installing the receiver. Check the power supply and shut off the main switch to disconnect the interface cable between the receiver and the machine's electrical box. -
Page 10: Troubleshooting
No radio signal detected LED on + transmitter switched Radio channel occupied Change transmitter's frequency channel LED on + DATA switched off Radio channel occupied by non Danfoss system Change transmitter's frequency channel DATA LED off + SINGAL LED on Radio error Replace radio Green;... - Page 11 Phone: +86 21 2080 6201 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.