Installing The Software - Windows; Windows; 2000 Professional / Windows; Me / Windows Nt - Minolta DiMAGE DiMAGE Scan Multi PRO Instruction Manual

INSTALLING THE SOFTWARE — WINDOWS

WINDOWS

® 98 / WINDOWS
• In the procedure below, the hard disk drive for system startup is drive C, and the CD-ROM drive is drive D.
• Make sure the scanner isn't connected to the computer when you install the software.
1. Turn on the computer to start
Windows ® .
2. Insert the DiMAGE Scan Multi
PRO CD-ROM into the CD-
ROM drive.
In a little while, a splash screen for
Setup will appear.
3. Click on [Starting up the
DiMAGE Scan Multi PRO
installer].
• In a little while, the program
decompression screen will appear
followed by the InstallShield
Wizard program screen, after that
the program will start
automatically.
• To confirm the contents of the
DiMAGE Scan Multi PRO CD-
ROM, click on [To access the CD-
ROM].
20
® 2000 / WINDOWS ®

ME / WINDOWS NT

®