Selective Colour Correction; The Selective Colour Correction Dialog Box - Names Of Parts; Reset - Minolta DiMAGE DiMAGE Scan Multi PRO Instruction Manual

SELECTIVE COLOUR CORRECTION

This feature separates the colour region into 7 groups, Red, Green, Blue, Cyan, Magenta,
Yellow and Black. You can adjust the colour range of each processed colour Cyan, Magenta,
Yellow, and Black against the separate colour groups. You can use this if you wish to correct a
certain colour only and not the whole picture, or if you wish to remove an unwanted colour
from a particular colour. For instance, if you want the sky look vividly blue instead of purplish,
decrease the component amount of Magenta from Blue to obtain a very blue sky.
Click on in the Image Correction tab.
THE SELECTIVE COLOUR CORRECTION
DIALOG BOX — NAMES OF PARTS
Colour list box
CMYK slider
1. Click on the arrow next to the Colour
list box to display the colour range to
be corrected.
2. Drag the Cyan (C), Magenta (M), Yellow
(Y) or Black (K) slider or input the
desired value in the text box.
• The values from -100 to 100 can be input.
• The change will not be reflected in the
prescan image.

RESET

If you click [Reset] button, the settings in the current correction
window are reset.
CMYK text box
Reset button
DiMAGE Scan Multi PRO
77