Ford Navigator 2000 Workshop Manual page 8

2000 Expedition/Navigator Workshop Manual
12. Install the PCV hose.
13. Install the throttle body adapter and the four bolts. Tighten the bolts in two stages.
Stage 1: Tighten to 10 Nm 89 (lb-in)
Stage 2: Tighten an additional 90 degrees.
14. Install the EGR valve to exhaust manifold tube.
Hand-tighten the fittings.
Tighten the upper fitting.
Tighten the lower fitting.
Connect the two vacuum hoses.
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/20/S...
Page 8 of 12
1/29/2010