Ford Navigator 2000 Workshop Manual page 11

2000 Expedition/Navigator Workshop Manual
26. Connect the throttle body cam.
1. Connect the accelerator cable.
2. Connect the speed control actuator cable.
3. Install the throttle return spring.
27. Install the accelerator cable snow shield and the bolts.
28. Connect the upper radiator hose and position the clamp.
29. Install the engine air cleaner and the air cleaner outlet tube. For additional information, refer to
30. Connect the battery ground cable. For additional information, refer to
31. Fill and bleed the engine cooling system. For additional information, refer to
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSYJ/~MUS~LEN/20/S...
Section 303-12.
Section 414-01.
Section 303-03.
Page 11 of 12
1/29/2010