FUTABA T18MZ Instruction Manual page 17

Digital trim
This transmitter is equipped with digital trims.
Each time you press a trim button, the trim position
moves one step. If you continue pressing it, the trim
position starts to move faster. In addition, when
the trim position returns to the center, the tone will
graphics on the screen. To change the trim rate,
you must activate this through the function menu,
within the linkage menu. Touch the trim button and
you will access another screen which enables you
to change the trim percentages.
Touch Panel/ Rotary Key/ Direct Key
+0
+0 +0
Battery1 0.0V
+0 +0
+0
Battery2 0.0V
Battery3 0.0V
00:00:00 System Menu Linkage Menu
Touch panel, rotary keys and direct keys are used
for entering data.
Touch Panel
stylus pen, which is also used as a toolbox, to enter
data.
Futaba Corporation
Condition 1
85%
Model Menu Return
15:11:25
Caution
or
with something hard, such as metal and sand sticking on the
give any physical shock to the surface.
panel due to environmental changes such as temperature, it
is not a defect.
Rotary key
In addition to touch panel, you can select items
by rotating the rotary keys to the left or to the right.
*There is also a function which cannot be operated only by
Rotary key.
Direct key
menu screens.
[How to change assignment of the direct key]
Danger
Since the sensitivity of T18MZ of the touch
panel improved, if a hook band etc. touch, it is
dangerous. Even if you touch a panel during a
touch panel lock in which
a screen is locked.
(S2-S3)
touch panel locked
The by The
S2 S3 S2
and pushed.
The function which acts as Locke of the touch panel
(S2-S3)
touch panel unlocked
by
S3
and pushed again.
<Before Use> 17