Specifying A Custom Size; Selecting The Paper Tray - Konica Minolta bizhub C550 User Manual

Setting up the PostScript driver (Windows)
To print, load A3 size paper in the tray ("Tray 1" or "Bypass Tray") of this
machine that was specified from the printer driver, and then specify the
settings described below from [Basic (Paper)] – [Change Tray Settings] –
[Wide Paper] in the control panel.
"A4W".
Enter the A3 paper size (420.0 × 297.0) in [Change Size].

Specifying a custom size

When printing on paper of a custom size, you can specify the paper size val-
ues by following the procedure described below.
1
From the "Original Size" or the "Paper Size" drop-down list, select
"Custom Size".
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
– Width: Specifies the width of the custom paper size according to
the selected measurement unit.
– Length: Specifies the length of the custom paper size according to
the selected measurement unit.
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.

Selecting the paper tray

You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
1
Click the Basic tab.
2
From the "Paper Tray" drop-down list, select the desired paper tray.
C550
6
6-8