Specifying A Custom Size; Selecting The Paper Tray - Konica Minolta bizhub C550 User Manual

Setting up the PCL driver (Windows)
settings described below from [Basic (Paper)] – [Change Tray Settings] –
[Wide Paper] in the control panel.
Select "A4W".
Enter the A3 paper size (420.0 × 297.0) in [Change Size].

Specifying a custom size

When printing on paper of a custom size, you can select a preregistered cus-
tom paper size or specify a paper size value as described below.
1
From the "Original Size" or the "Paper Size" drop-down list, select
"Custom Size".
The Custom Size Settings dialog box appears.
2
Specify settings for the following:
– Width: Specifies the width of the custom paper size according to
the selected measurement unit.
– Length: Specifies the length of the custom paper size according to
the selected measurement unit.
– Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
Note
For custom sizes that are used often, it comes in handy if you add them
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to "Specifying the Settings tab settings" on page 5-47.

Selecting the paper tray

You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
C550
5
5-8