Unable To Specify Desired Settings Or Unable To Print As Specified - Konica Minolta bizhub C550 User Manual
Konica minolita bizhub c550 user's guide
Hide thumbs
Also See for bizhub C550:
- User manual (794 pages) ,
- Quick manual (208 pages) ,
- Brochure (17 pages)
Table of Contents
Advertisement
Troubleshooting
10.2
Unable to specify desired settings or unable to print
as specified
Perform these troubleshooting procedures if you cannot specify the desired
settings in the printer driver, or if the print results do not represent the set-
tings that have been specified.
Note
Some of the printer driver functions cannot be combined with other func-
tions.
Symptom
A printer driver setting
cannot be selected.
The "Conflicts" mes-
sage with "Unable to
Select" or "Function
Canceled" appears.
Printing is not per-
formed as specified.
The watermark cannot
be printed.
The staple function
cannot be specified.
Stapling cannot be
performed.
C550
Probable cause
Some functions cannot be com-
bined.
An incorrect combination of func-
tions has been specified.
Incorrect settings are specified.
A combination of functions, al-
though possible in the printer driv-
er, is not possible with this
machine.
The paper size, orientation, and
other settings specified in the ap-
plication have priority over those
specified in the printer driver.
The watermark is not correctly
set.
The watermark density is set to a
level that is too low.
Watermarks cannot be printed in
graphics applications.
Stapling is not possible if "Paper
Type" is set to "Thick" or "Trans-
parency".
The staple function requires op-
tional finisher.
If are a large number of pages to
be printed, stapling cannot be
performed.
Stapling is not possible if the doc-
ument contains pages of different
sizes.
Action
Do not try to select settings that
are not available.
Check the settings and specify
the functions correctly.
Check each setting in the printer
driver.
Enter the correct settings in the
application.
Check the watermark settings.
Check the density settings.
No watermark can be printed in
this case.
Check each setting in the printer
driver.
Install the required optional finish-
er and enable it using the printer
driver.
Change the number of pages to
be printed.
Check the document.
10
10-3
Advertisement
Table of Contents
