Changing A Bulb - Ford Transit Owner's Manual

2. Remove the screws.
3. Pull the headlamp toward the front of
your vehicle to disengage it from its
locating points and then lift the
headlamp up.
4. Disconnect the electrical connectors.
Note: When you install the headlamp, make
sure that you correctly attach the electrical
connector.
Transit (TTG) Vehicles Built From: 19-06-2014, Vehicles Built Up To: 31-12-2014, EK3J-19A321-AKA (CG3612en) enGBR, Edition date: 04/2014, First Printing
Maintenance
Note: When you install the headlamp, make
sure that you correctly engage its locating
points.

CHANGING A BULB

Switch all of the lamps and the
ignition off. Failure to do so could
result in serious personal injury.
Bulbs become hot when in use. Let
them cool down before you remove
them.
Use the correct specification bulb. See
Bulb Specification Chart (page 170).
The following instructions describe how to
remove the bulbs. Install in the reverse
order unless otherwise stated.
Note: LED lamps are not serviceable. See
an authorized dealer.
Headlamp
A
B
C
D
E
165
WARNINGS
Cornering lamp
Daytime running lamp and
headlamp high beam
Direction indicator
Headlamp low beam
Side lamp