Enabling And Disabling - Ford Transit Owner's Manual

To set the power running boards to the deployed position, scroll to:
Message
Driver assist
Power step
Deploy

Enabling and Disabling

You can enable and disable the power
running board feature in the information
display. See General Information (page
63).
To enable or disable the power running board feature, scroll to:
Message
Driver assist
Power step
Select one of the following:
Off
Auto
When you switch the ignition on, the
system turns on automatically.
Bounce-back
The running board will reverse direction
and move to the end of travel if it
encounters an object while moving.
Transit (TTG) Vehicles Built From: 19-06-2014, Vehicles Built Up To: 31-12-2014, EK3J-19A321-AKA (CG3612en) enGBR, Edition date: 04/2014, First Printing
Power Running Boards
Press the OK button.
Press the OK button.
Press the OK button.
Press the OK button.
Press the OK button.
Press the OK button. When disabled the power running
boards move to the stowed position regardless of the door
position.
Press the OK button. When enabled the power running boards
move to the correct position based on the door position.
40
Action
Action and Description