Ford Transit Owner's Manual page 83

Programming the Once Function
Selecting this function allows you to
program one heating cycle for one specific
day.
Set the time you want your vehicle to be
warm and ready to drive. Use the
information display controls on the
steering wheel. See Information
Displays (page 63).
1. Highlight the time at the top of the
menu and press the OK button. The
hours start to flash.
To switch the programmed functions off, scroll to:
Message
Settings
Convenience
Park heater
Select one of the following:
Time 1
Time 2
Once
Switching the Heat Now Function On
WARNING
Do not use the fuel operated parking
heater at fuel filling stations or near
sources of combustible vapors, dust
or in enclosed spaces. This could result in
serious personal injury or death.
Transit (TTG) Vehicles Built From: 19-06-2014, Vehicles Built Up To: 31-12-2014, EK3J-19A321-AKA (CG3612en) enGBR, Edition date: 04/2014, First Printing
Climate Control
2. Set the hours using the up and down
3. Press the right arrow button. Set the
Switching Programmed Functions Off
Use the information display controls on
the steering wheel. See Information
Displays (page 63).
Action and Description
Press the OK button.
Press the OK button.
Press the OK button.
Uncheck the active programmed heating cycles as required.
Uncheck the active programmed heating cycles as required.
Uncheck the active programmed heating cycles as required.
Selecting this function allows you to switch
the system on immediately.
Use the information display controls on
the steering wheel. See Information
Displays (page 63).
81
arrow buttons.
minutes using the up and down arrow
buttons. Press the OK button.