Ford Transit Owner's Manual page 82

Programming the Fuel Operated
Parking Heater
Use the information display controls on
the steering wheel. See Information
Displays (page 63).
To program the fuel operated parking heater, scroll to:
Message
Settings
Convenience
Park heater
Select one of the following:
Time 1
Time 2
Once
Heat now
Programming the Time Functions
Set the time you want your vehicle to be
warm and ready to drive. Use the
information display controls on the
steering wheel. See Information
Displays (page 63).
1. Select the desired days you want the
system to warm up your vehicle.
Highlight each desired day and press
the OK button.
Transit (TTG) Vehicles Built From: 19-06-2014, Vehicles Built Up To: 31-12-2014, EK3J-19A321-AKA (CG3612en) enGBR, Edition date: 04/2014, First Printing
Climate Control
Note: The time and date on your vehicle s
clock must be set correctly. See Clock
(page 68).
Note: You must program the time at least
70 minutes before the time you wish to set.
Note: The programmed time is when you
want your vehicle to be warm and ready to
drive, not when the heater turns on.
Action and Description
Press the OK button.
Press the OK button.
Press the OK button.
Allows you to program a heating cycle for each day of the
week. These times will remain stored and the system will
warm up your vehicle at the programmed times.
Allows you to program a second heating cycle for each day
of the week. These times will remain stored and the system
will warm up your vehicle at the programmed times.
Select to set a second heating cycle, for example different
times on different days or twice on the same day.
Allows you to program one heating cycle for a specific day.
Switches the system on immediately.
2. Highlight the time at the top of the
3. Set the hours using the up and down
4. Press the right arrow button. The
80
menu and press the OK button. The
hours will flash.
arrow buttons.
minutes will flash. Set the minutes
using the up and down arrow buttons.
Press the OK button.