Operation Of Your New Treadmill; Operation Of Your Console; Getting Started - Spirit 1613285 XT285 Owner's Manual

OPERATION OF YOUR CONSOLE

GETTING FAMILIAR WITH THE CONTROL PANEL
CONSOLE
PROGRAM BUTTONS
(Manual, Hill,
Fat Burn, Cardio, Strength,
Interval, 2HR)
QUICK KEYS
CONTROL KEYS

GETTING STARTED

Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the
power switch located at the front of the treadmill below the motor cover. Ensure that the
safety key is installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then
the Time and Distance windows will display Odometer readings for a short time. The Time
window will show how many hours the treadmill has been in use and the Distance window
will show how many miles (or Kilometers if the treadmill is set to metric readings) the
treadmill has gone. Then a message
software version. The treadmill will then enter idle mode, which is the starting point for
operation.
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
in the message center will show the current
15
SPEAKER
DATA DISPLAY
(Pace, Distance, Time
[Elapsed/Countdown],
Calories, & Pulse)
DOT MATRIX
(Speed, Program Profiles,
Incline, & Lap Track)
MESSAGE CENTER
(Program Name, Laps,
Altitude, & Segment Time)
COOLING FAN
SAFETY KEY
Dyaco Canada Inc. 2013