Heat Sink - HP Pavilion 17 Maintenance And Service Manual

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the optical drive.
6. Remove the top cover from the base enclosure (see
7. Remove the WLAN module (see
8. Remove the subwoofer (see
9. Remove the system board (see
Remove the fan:
1. Turn the system board upside down.
2. Disconnect the fan cable from the system board, and then remove the piece of tape that secures
the fan to the heat sink (1).
3. Remove the 3 screws securing the fan to the unit (2) and lift the fan to remove it (3).
4. Lift the fan (4) to remove it.
Reverse this procedure to install the fan.

Heat sink

Description
For use with HP Pavilion 15 Notebook PC computer models:
For use only on computer models with Intel processors discrete memory 19 W
For use only on computer models equipped with AMD processors and UMA graphics 19 W
For use only on computer models equipped with AMD processors and discrete graphics 19W
120 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 76),
WLAN module on page
Subwoofer (select models only) on page
System board on page
Base enclosure on page
96).
102).
106).
Spare part number
762524-001
767339-001
767340-001
80).