Table of Contents
Advertisement
Problem
Symptom
Shooting data
is displayed,
Camera set to
but live image
manual-
is entirely
exposure
black or
mode (M).
white.
If the camera does not function normally, turn it off, remove and reinsert the batteries, or unplug and
reconnect the AC adapter. Always turn the camera off using the mode dial otherwise the memory
card may be damaged and camera settings reset.
The camera temperature rises with extended periods of use. Care should be taken to avoid burns
when handling the camera, batteries, or memory card.
About Ni-MH batteries
When using Ni-MH batteries, clean both battery terminals with
residue. Because of the sophisticated computer system, the camera critically monitors power levels. If
the battery terminals are dirty, the camera may give a false low-battery warning. If battery perfor-
mance is unusually low, wipe the battery terminals with a clean, dry cloth.
Ni-MH battery performance will decrease if the batteries are often recharged before they have been
fully discharged. Completely exhaust the Ni-MH batteries using the camera before charging.
Cause
Shutter speed and
aperture combination is
extremely under or over-
exposing the live image.
Solution
Change the shutter speed or
aperture value until an image
appears on the monitor (p.
a
dry cloth to wipe off any dirt or
60
).
119
Hide quick links:
Advertisement
Table of Contents
