Minolta DiMAGE F100 Instruction Manual page 69

To change color, sharpness, contrast, or saturation, select the setting from the Digital Effects Control
option in the custom 2 section of the multi-function recording mode menu; the setting screen will
open.
select enter
The setting will remain in effect until it is changed. If sharpness, contrast, or color saturation is set to
any setting other than normal, an icon will be displayed indicating an increase (+) or decrease (–) in
the quality selected. If the Vivid Color is selected, "VIVID" will be displayed at the top of the monitor.
Unlike the display on a computer, changes made with sharpness, contrast, and color saturation may
be difficult to see on the LCD monitor. However, when viewed with imaging software, the changes will
be evident.
1
Use the left/right keys of the controller (1) to select the
color mode, or level of sharpness, contrast, or saturation;
2
an icon is displayed on the screen and the live image
shows the effect of each setting. Press the central button of
the controller (2) to apply the setting.
69